あんまり細かい事を考えずにやってるので、参考までに。
OS再インストールからFreeBSD 9.1R(64bit)を選んで、Virtioを無効にしてあげれば、
さくっとおなじみのインストーラーが起動してきます。
bootonlyのISOイメージがマウントされるので、ネットワークインストールになりますが、
IPv4アドレスについてはDHCPで取得すれば、自分が使うべきアドレスが割り当てられるらしい。
本番では固定で振るにしても、インストール時にこれが出来るのは楽かも。
@tatsuya_info ディスク周り気になりますね。何も入ってない環境だと、とりあえずddで大きいファイル作ったりします。
— しょーた (@shotan) July 16, 2013
という事だったので、ddやってみました。
root@sv96:/root # dd if=/dev/zero of=./1g bs=1m count=1024
1024+0 records in
1024+0 records out
1073741824 bytes transferred in 39.466677 secs (27206289 bytes/sec)
ちなみに、さくらのVPS 2GBプランだとこんな感じ。
sv95# dd if=/dev/zero of=./1g bs=1m count=1024
1024+0 records in
1024+0 records out
1073741824 bytes transferred in 25.660472 secs (41844196 bytes/sec)
これだけ見ると、さくらのVPSの方が早いですね。
あと、気づいたところだとIPv6周りが不安定な事。
— www.kddi.com ping6 statistics —
303 packets transmitted, 87 packets received, 71.3% packet loss
round-trip min/avg/max/std-dev = 119.444/186.297/1002.150/221.998 ms
ゲートウェイまでは問題ないっぽいから、設定とかOSの問題じゃないかな・・・？
まぁ、この感じだとあえてConoHa VPSを使うことはおそらく無いかなぁ。
[追記]
dmesg 張っておきます。
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz (2593.86-MHz K8-class CPU)
Origin = “GenuineIntel” Id = 0x206d7 Family = 6 Model = 2d Stepping = 7
Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
Features2=0x9eba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,HV>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
real memory = 1073741824 (1024 MB)
avail memory = 1009815552 (963 MB)
Event timer “LAPIC” quality 400
ACPI APIC Table: <BOCHS BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer “RTC” frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter “HPET” frequency 100000000 Hz quality 950
Timecounter “ACPI-fast” frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc060-0xc06f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc040-0xc05f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfdffffff,0xfebf0000-0xfebf0fff at device 2.0 on pci0
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.4> port 0xc000-0xc03f mem 0xfeba0000-0xfebbffff irq 11 at device 3.0 on pci0
em0: Memory Access and/or Bus Master bits were not set!
em0: Ethernet address: fa:16:3e:00:11:c0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter “i8254” frequency 1193182 Hz quality 0
Event timer “i8254” frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <QEMU 1.0> at usbus0
uhid0: <QEMU 1.0 QEMU USB Tablet, class 0/0, rev 1.00/0.00, addr 2> on usbus0
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 1.0> Removable CD-ROM SCSI-0 device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada0 at ata1 bus 0 scbus1 target 0 lun 0
ada0: <QEMU HARDDISK 1.0> ATA-7 device
ada0: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada0: 20480MB (41943040 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad2
ada1 at ata1 bus 0 scbus1 target 1 lun 0
ada1: <QEMU HARDDISK 1.0> ATA-7 device
ada1: 16.700MB/s transfers (WDMA2, PIO 8192bytes)
ada1: 81920MB (167772160 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad3
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ada0p2 [rw]…